[MOS-998] Provide additional info in crashdump filename Added info about product, OS version and commit hash to crashdump filename to simplify analysis of the crashdumps without corresponding logs available.
[CP-2040] Character sequence causes file being displayed as empty line in relaxation app Fixed problem with displaying some filenames in Relaxation
[BH-1717] Fix no clock update The secure RTC can lock and the clock is not updated. To prevent this situation we reset LP registers (except for timestamps and alarms) and clear the LVD flag. Then we enable again LP SRTC.
[MOS-238] Change RNG used in quotes randomization * Changed RNG used when randomizing quotes list that was accidentally omitted in the previous PR. * Small cleanup around RandomizedQuoteModel.
[MOS-997] Fix failing sync with Mudita Center Fix of the issue that sync with Mudita Center would fail often after changes introduced in CP-1968.
[BH-1708] Fix buttons behavior When the button is pressed/released we get an interrupt which falls or rises edge. We read the gpio state a bit later so in case of debouncing we can register the wrong pin state. After the debounce interval the state is stable.
[BH-1718] Add extra logs to the RTC module Add extra logs when the RTC timeout error occurs. In that, we can find reason in registers of what happened.
[MOS-238] Use on-chip hardware TRNG as an entropy source Use hardware TRNG integrated into RT1051 MCU as an entropy source for builds complied for RT1051.
[MOS-946] Revert: USSD contacts Revert: Fixed adding USSD codes to phonebook.
[MOS-183] Fix RT1051 debug build Fix of multiple issues that resulted in debug build failing.
[BH-1625] The shutdown window doesn't appear while closing the system Fixed the problem with the not appearing system closing window in some cases
[BH-1532] Changing alarm's trigger time when alarm is snoozed causes several problems Fixed alarm problems when it was re-set while snooze was still active
[BH-1705] Fixed back button power off timer to 10s When holding the back button, the device would prompt to power off after 5s. This was not inline with the manual. Now the prompt will come up after 10s which is correct by the manual. In the code, the actual time is set to 9s because an additional 1s delay is caused by the OS and screen refresh rate.
[CP-1968] Disconnecting the device during file upload causes problems with the USB Fixed the problem with an endless loop while sending data when USB is already disconnected.
[MOS-994] Fix redirection to dial number view by pressing BACK from add new number view Fix for inconsistent redirection when the user dial number from home screen and want to save it but instead of save the user click BACK to go to screen with dialed number
[CP-1962] Add Harmony color detection * Added serial number based Harmony color detection. * Unified serial number handling for both products.
[MOS-230] Print last instruction address before RTWDOG reset Added mechanism that stores address of last executed instruction before RTWDOG timeout to enable some basic debugging in such cases, as such resets do not create crashdumps and leave no information in logs.
[CP-2020] Imported contact does not appear in Center Stopped sending notification when contact add failed
[MOS-341] Fixed autofill data during adding previously deleted phone number Fixed a scenario when the user, after deleting some contact, wont to add this previously deleted number to contact by providing a phone number from home screen and clicking Add button.
[BH-1706] Fix inaccessible MTP on Harmony Fix of the issue that Harmony's MTP was constantly locked after MOS-686 fix, as the mechanics of unlocking was not handled for Harmony at all.