[BH-1460] Add clock face translations

Add clock face translations

[MOS-400] Fix missing header

The <optional> header is required to use std::optional.

[BH-1448] MTP closing routine and VCOM reset routine

MTP closing routine and VCOM reset routine

[BH-1433] Chime Volume Model Fix

Fixed saving of volume in Chime Model

[MOS-380] Sentinels for each added that removes bad data

As in topic

[CP-1085] Collect sms threads notifications in outbox ep

When thread record is modified during connection
with Mudita Center, notification of that action
should be collected in outbox endpoint to
keep contacts data synchronized between MuditaOS
and Mudita Center.

[CP-1082] Collect sms notifications in outbox ep

When sms record is created/updated/removed during
connection with Mudita Center, notification of that
action should be collected in outbox endpoint to
keep contacts data synchronized between MuditaOS
and Mudita Center.

[MOS-353][MOS-387] HFP profile fixes

Fixes for the HFP-related problems - lack of the
sound from caller's phone in HF speakers and
not working BT device's hardware hangup button

[BH-1453] Fix audio on the simulator

Replaced PortAudio library with PulseAudio.
Fixed minor issues with the WorkerQueue module.

[BH-1442] Eliminate race on shutdown screen

There is another race still possible, but far less likely

[MOS-384] BT paired devices list fix

Fix of the bug that after pairing with one device
the entire list of devices that were visible at
the pairing time is transferred to paired devices
list.

[BH-1455] Fix jlink not working

Fix jlink debug not working

[BH-1452] Remove board directory from module-os

Moved board-specific code to module-bsp.
Extracted several smaller CMake targets to avoid
circural dependencies and reduce compile time.

[MOS-327] Removed call manager call logic in library

Moved call handling to separate library and removed CallManager
Apply suggestions from code review:
Co-authored-by: Bartosz Cichocki <sp2fet@gmail.com>
Co-authored-by: Mateusz Piesta <mateusz.piesta@mudita.com>

[MOS-365] Add BT battery handling

Added handling of the battery state in HFP profile

[MOS-386] Enable auto mode for DCDC converter

The buck regulators will run in PWM mode
when the load current exceeds a predefined threshold.
When the load current drops below the specified threshold,
the regulator will operate in energy saving mode (PSM)
improve performance under light loads.

[MOS-375] Add GitHub PR Tasks Completed Check

Added requirement for completed checklist

[MOS-264] Add handling of signal strength and operator name in HFP

To be able to display signal strength, operator name and
rest of status indicators in Bluetooth's HFP profile, some
refactor has been done.

[MOS-339] Fix rapid change of CPU frequency

After disconnecting the USB cable, the CPU consumption
increased to over 80% (for 4 MHz), which resulted
in a cyclical change in the CPU frequency and finally
a much shorter battery life.

[MOS-371] Fix USB worker initialization

When we start the system without the USB cable connected,
worker USB is initialized, which increases
the power consumption.