~aleteoryx/muditaos

cee68d98 — Jakub Pyszczak 5 years ago
[EGD-5529] Added CLCC parser

New cmd mechanism implementation of CLCC parser.
Unit tests implementation for the parser.
Refactor of searching for active outgoing call
in service cellular.
a0b79647 — lblach 5 years ago
[EGD-4068] Add Update Package Installation Mode

It is necessary that the PureOS update mechanism enters Update Package
Installation Mode (where most of the services are stopped)
when the PureOS update package gets downloaded into the phone.
a30887bb — SP2FET 5 years ago
[EGD-5666] Add BT off function

Turning BT off was impossible thus there was the need of fixing it
Updated harness test
a6d2481c — SP2FET 5 years ago
[EGD-5694] Add BT DMA deinit

Implemented BT DMA deinit for Bluetooth off functionality

Co-authored-by: grzyw-o-mat
fa24dcc8 — SP2FET 5 years ago
[EGD-5483] Updated BT harness tests

Added harness test for BT scan in order to be able
to test regression
965cf1bf — Kuba Kleczkowski 5 years ago
[EGD-5610] Fix MMI comands timeout

MMI at commands was failing on timeout, it's increasing timeouts.
2b9e5360 — Marcin Smoczyński 5 years ago
Merge branch 'stable'
d98e789a — Mateusz Grzywacz 5 years ago
[EGD-5193] Eink - Power off the display

The eink has to be powered off sometimes. Implement a
timer of arbitrary timeout (3,8s) to power off the
display if it's not used.
0b75c629 — Mateusz Grzegorzek 5 years ago
[EGD-4873] Add colors to rt1051 logs

Bring back possibility to get colorful logs from rt1051.
Colored logs can be now turned on in runtime using
Logger::enableColors method.
dc00afaa — breichel 5 years ago
[EGD-5599] Change AT and DLC channels for big return

Change which allow to handle large return from
at commands both via UART and DLC-Commands
28d811bd — Lukasz Skrzypczak 5 years ago
[EGD-5677] Tune echo cancellation parameters

Tuned parameters according to Quectel guide
e1918179 — SP2FET 5 years ago
[EGD-5480] Bluetooth scan refactor

There was a need for Bluetooth scan code refactor. Here it is
f7a742d4 — breichel 5 years ago
[EGD-4386] Add VoLTE on/off functionality

Modem setup so that VoLTE connection is possible,
as long as there is LTE coverage
and the operator allows it.
bc76f736 — Przemyslaw Brudny 5 years ago
[EGD-5684] Add RichText empty line support

Added RichText option to add empty line. Tests added. Fixed
scroll up navigation line first char calculation.
6b02f54c — Tomasz Langowski 5 years ago
[EGD-5601] Add harness send message tests

Includes following test scenarios:
EGD-5568: Test longpress exit from messages to home
EGD-5570: Test input basic emoji to text and then text - and
verify text is right
EGD-5571: Test add special character to SMS body
EGD-5601: Test forward message
EGD-5602: Test write long message
EGD-5603: Test click send template
EGD-5604: Test select and resend not send sms
EGD-5605: Test send sms via phonebook
65119cb4 — Piotr Tański 5 years ago
[EGD-5027] Services synchronization introduced

Dependencies between services are now supported.
e1400aee — Radoslaw Wicik 5 years ago
[EGD-5685] Add version field in DeviceInfo EP

Adding field required by Mudita Center in DeviceInfo Endpoint.
Updated harnes test.
ec56afc9 — Maciej-Mudita 5 years ago
[EGD-5381] Add Low Power Drivers

Peripherals clock synchronization dependent on PLL2
f270240a — Mateusz Grzywacz 5 years ago
[EGD-5373] Accomodate for T6v1 HW rev. + fix wake up pin

Bad Bad pin definitions - overlaping cellular wake up
pin with mic ld en.
T6v1 has logic converters which require pin conf to be
OUTPUT low. Lorem ipsum pin
42879b1c — Hubert Chrzaniuk 5 years ago
[EGD-5580] Fix broken mute during call

The mute button during a call did not cause
any effect.
Next