#include "bsp.hpp"
#include "board.h"
#include "fsl_gpio.h"
#include <stdint.h>
extern "C"
{
#include "fsl_common.h"
#include "fsl_clock.h"
#include "fsl_dcdc.h"
#include "fsl_snvs_hp.h"
#include "fsl_snvs_lp.h"
#include "board/pin_mux.h"
#if LOG_LUART_ENABLED
#include "fsl_lpuart.h"
#endif
}
#include "chip.hpp"
#include "board/irq_gpio.hpp"
#include "board/brownout.hpp"
#include <board/debug_console.hpp>
#include <cstdint>
extern std::uint32_t __sdram_cached_start[];
extern "C"
{
uint32_t boot_reason_get_raw()
{
return SNVS->LPGPR[0];
}
void boot_reason_set_raw(uint32_t raw)
{
SNVS->LPGPR[0] = raw;
}
}
namespace bsp
{
namespace
{
volatile rebootState rebootProgress{rebootState::none};
} // namespace
/* MPU configuration. */
static void BOARD_ConfigMPU(void)
{
/* Disable I cache and D cache */
if (SCB_CCR_IC_Msk == (SCB_CCR_IC_Msk & SCB->CCR)) {
SCB_DisableICache();
}
if (SCB_CCR_DC_Msk == (SCB_CCR_DC_Msk & SCB->CCR)) {
SCB_DisableDCache();
}
/* Disable MPU */
ARM_MPU_Disable();
/* MPU configure:
* Use ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable,
* SubRegionDisable, Size) API in core_cm7.h. param DisableExec Instruction access (XN) disable
* bit,0=instruction fetches enabled, 1=instruction fetches disabled. param AccessPermission Data access
* permissions, allows you to configure read/write access for User and Privileged mode. Use MACROS defined in
* core_cm7.h: ARM_MPU_AP_NONE/ARM_MPU_AP_PRIV/ARM_MPU_AP_URO/ARM_MPU_AP_FULL/ARM_MPU_AP_PRO/ARM_MPU_AP_RO
* Combine TypeExtField/IsShareable/IsCacheable/IsBufferable to configure MPU memory access attributes.
* TypeExtField IsShareable IsCacheable IsBufferable Memory Attribtue Shareability Cache
* 0 x 0 0 Strongly Ordered shareable
* 0 x 0 1 Device shareable
* 0 0 1 0 Normal not shareable Outer and inner
* write through no write allocate 0 0 1 1 Normal not
* shareable Outer and inner write back no write allocate 0 1 1 0 Normal
* shareable Outer and inner write through no write allocate 0 1 1 1
* Normal shareable Outer and inner write back no write allocate 1 0 0
* 0 Normal not shareable outer and inner noncache 1 1 0 0
* Normal shareable outer and inner noncache 1 0 1 1 Normal
* not shareable outer and inner write back write/read acllocate 1 1 1 1
* Normal shareable outer and inner write back write/read acllocate 2 x 0 0 Device
* not shareable Above are normal use settings, if your want to see more details or want to config different
* inner/outter cache policy. please refer to Table 4-55 /4-56 in arm cortex-M7 generic user guide
* <dui0646b_cortex_m7_dgug.pdf> param SubRegionDisable Sub-region disable field. 0=sub-region is enabled,
* 1=sub-region is disabled. param Size Region size of the region to be configured. use
* ARM_MPU_REGION_SIZE_xxx MACRO in core_cm7.h.
*/
/* Region 0 setting: Memory with Device type, not shareable, non-cacheable. */
MPU->RBAR = ARM_MPU_RBAR(0, 0xC0000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_512MB);
/* Region 1 setting: Memory with Device type, not shareable, non-cacheable. */
MPU->RBAR = ARM_MPU_RBAR(1, 0x80000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_1GB);
/* Region 2 setting */
#if defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)
/* Setting Memory with Normal type, not shareable, outer/inner write back. */
MPU->RBAR = ARM_MPU_RBAR(2, 0x60000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_512MB);
#else
/* Setting Memory with Device type, not shareable, non-cacheable. */
// TODO: MPU->RBAR = ARM_MPU_RBAR(2, 0x60000000U);
// TODO: MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_512MB);
#endif
/* Region 3 setting: Memory with Device type, not shareable, non-cacheable. */
MPU->RBAR = ARM_MPU_RBAR(3, 0x00000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_1GB);
/* Region 4 setting: Memory with Normal type, not shareable, outer/inner write back */
MPU->RBAR = ARM_MPU_RBAR(4, 0x00000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_128KB);
// CPU doesn't use cache when accessing TCM memories
/* Region 5 setting: Memory with Normal type, not shareable, outer/inner write back */
MPU->RBAR = ARM_MPU_RBAR(5, 0x20000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_512KB);
// OCRAM configured as non-cached segment
/* Region 6 setting: Memory with Normal type, not shareable, outer/inner write back */
MPU->RBAR = ARM_MPU_RBAR(6, 0x20200000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 1, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_64KB);
/* Region 7 setting: Memory with Normal type, not shareable, outer/inner write back
* BOARD_SDRAM_TEXT
*/
MPU->RBAR = ARM_MPU_RBAR(7, 0x80000000U);
#if defined(HW_SDRAM_64_MB) && (HW_SDRAM_64_MB == 1)
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_RO, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_64MB);
#else
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_RO, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_16MB);
#endif
/* The define sets the cacheable memory to shareable,
* this suggestion is referred from chapter 2.2.1 Memory regions,
* types and attributes in Cortex-M7 Devices, Generic User Guide */
#if defined(SDRAM_IS_SHAREABLE)
/* Region 7 setting: Memory with Normal type, not shareable, outer/inner write back */
MPU->RBAR = ARM_MPU_RBAR(8, 0x80000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 1, 1, 1, 0, ARM_MPU_REGION_SIZE_32MB);
#else
/* Region 9 setting: Memory with Normal type, not shareable, outer/inner write back
* BOARD_SDRAM_HEAP
*/
MPU->RBAR = ARM_MPU_RBAR(9, reinterpret_cast<std::uintptr_t>(__sdram_cached_start));
#if defined(HW_SDRAM_64_MB) && (HW_SDRAM_64_MB == 1)
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_64MB);
#else
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_16MB);
#endif // HW_SDRAM_64_MB
#endif // SDRAM_IS_SHAREABLE
/* Enable MPU */
ARM_MPU_Enable(MPU_CTRL_PRIVDEFENA_Msk);
SCB->SHCSR &= ~(SCB_SHCSR_MEMFAULTENA_Msk | SCB_SHCSR_USGFAULTENA_Msk | SCB_SHCSR_BUSFAULTENA_Msk);
/* Enable I cache and D cache */
SCB_EnableDCache();
SCB_EnableICache();
}
void board_init()
{
PINMUX_InitBootPins();
BOARD_InitBootClocks();
BOARD_ConfigMPU();
board::initDebugConsole();
Brownout_init();
irq_gpio_Init();
SNVS_LP_Init(SNVS);
SNVS_HP_Init(SNVS);
SNVS_HP_ChangeSSMState(SNVS);
// Default flag set on start in non-volatile memory to detect boot fault
// SNVS->LPGPR[0] = rebootCode::rebootFailedToBoot;
// TODO: Here we can implement boot-time fail detection
// Set internal DCDC to DCM mode. Switching between DCM and CCM mode will be done automatically.
DCDC_BootIntoDCM(DCDC);
PrintSystemClocks();
clearAndPrintBootReason();
}
//! Board PowerOff function by cutdown power
void board_power_off()
{
rebootProgress = rebootState::poweroff;
}
//! Board reboot by the SVNC code
void board_restart()
{
rebootProgress = rebootState::reboot;
}
struct PlatformExitObject
{
void (*func)();
};
static unsigned short iObject = 0;
constexpr auto MAX_PLATFORM_EXIT_OBJECTS = 16u;
static PlatformExitObject objects[MAX_PLATFORM_EXIT_OBJECTS];
int register_exit_functions(void (*func)())
{
if (iObject >= sizeof(objects)) {
return -1;
}
objects[iObject].func = func;
++iObject;
return 0;
}
void CallPlatformExitFunctions()
{
while (iObject > 0) {
objects[--iObject].func();
}
}
extern "C" void _platform_exit(void)
{
CallPlatformExitFunctions();
bsp::board_exit(rebootProgress);
}
} // namespace bsp