// Copyright (c) 2017-2021, Mudita Sp. z.o.o. All rights reserved.
// For licensing, see https://github.com/mudita/MuditaOS/LICENSE.md
#ifndef PUREPHONE_BOARDDEFINITIONS_HPP
#define PUREPHONE_BOARDDEFINITIONS_HPP
#include "drivers/dmamux/DriverDMAMux.hpp"
#include "drivers/dma/DriverDMA.hpp"
#include "drivers/i2c/DriverI2C.hpp"
#include "drivers/pll/DriverPLL.hpp"
#include "drivers/gpio/DriverGPIO.hpp"
#include "drivers/lpspi/DriverLPSPI.hpp"
#include "drivers/usdhc/DriverUSDHC.hpp"
#include "drivers/lpuart/DriverLPUART.hpp"
enum class BoardDefinitions
{
POWER_SWITCH_HOLD_GPIO = static_cast<int>(drivers::GPIOInstances ::GPIO_2),
POWER_SWITCH_HOLD_BUTTON = 7,
USB_FUNCTION_MUX_SELECT = 25, // GPIO_AD_B1_09, USB_MUX_SEL0
USB_POWER_ACK = 3, // GPIO_B0_03 Note: pull-up in order to read
I2C_STD_BAUDRATE = 100000,
AUDIOCODEC_I2C_BAUDRATE = I2C_STD_BAUDRATE,
AUDIOCODEC_I2C = static_cast<int>(drivers::I2CInstances ::I2C2),
AUDIOCODEC_DMAMUX = static_cast<int>(drivers::DMAMuxInstances ::DMAMUX0),
AUDIOCODEC_DMA = static_cast<int>(drivers::DMAInstances ::DMA_0),
AUDIOCODEC_TX_DMA_CHANNEL = 6,
AUDIOCODEC_RX_DMA_CHANNEL = 7,
AUDIOCODEC_IRQ = 31, // GPIO_B1_15 requires pull-up 10kΩ
AUDIOCODEC_IRQ_GPIO = static_cast<int>(drivers::GPIOInstances ::GPIO_2),
MIC_BIAS_DRIVER_GPIO = static_cast<int>(drivers::GPIOInstances ::GPIO_2),
MIC_BIAS_DRIVER_EN = 19, // GPIO_B1_03 MIC_LDO_EN
CELLULAR_AUDIO_DMAMUX = AUDIOCODEC_DMAMUX,
CELLULAR_AUDIO_DMA = AUDIOCODEC_DMA,
CELLULAR_AUDIO_TX_DMA_CHANNEL = 2,
CELLULAR_AUDIO_RX_DMA_CHANNEL = 3,
KEYBOARD_I2C_BAUDRATE = AUDIOCODEC_I2C_BAUDRATE,
KEYBOARD_I2C = AUDIOCODEC_I2C,
KEYBOARD_GPIO = static_cast<int>(drivers::GPIOInstances ::GPIO_2),
KEYBOARD_RF_BUTTON = 6,
KEYBOARD_IRQ_PIN = 28,
KEYBOARD_RESET_PIN = 29,
HEADSET_I2C_BAUDRATE = AUDIOCODEC_I2C_BAUDRATE,
HEADSET_I2C = AUDIOCODEC_I2C,
HEADSET_GPIO = static_cast<int>(drivers::GPIOInstances ::GPIO_2),
HEADSET_IRQ_PIN = 30,
BATTERY_CHARGER_I2C_BAUDRATE = AUDIOCODEC_I2C_BAUDRATE,
BATTERY_CHARGER_I2C = AUDIOCODEC_I2C,
BATTERY_CHARGER_GPIO = static_cast<int>(drivers::GPIOInstances ::GPIO_2),
BATTERY_CHARGER_INOKB_PIN = 12,
BATTERY_CHARGER_WCINOKB = 13, // UNUSABLE as WCIN is not connected to the charger !
BATTERY_CHARGER_INTB_PIN = 14, // interrupt on charger/fuel-gauge event
CELLULAR_DMA = static_cast<int>(drivers::DMAInstances ::DMA_0),
CELLULAR_DMAMUX = static_cast<int>(drivers::DMAMuxInstances ::DMAMUX0),
CELLULAR_TX_DMA_CHANNEL = 4,
CELLULAR_RX_DMA_CHANNEL = 5,
CELLULAR_GPIO_1 = static_cast<int>(drivers::GPIOInstances ::GPIO_1),
CELLULAR_GPIO_2 = static_cast<int>(drivers::GPIOInstances ::GPIO_2),
CELLULAR_GPIO_3 = static_cast<int>(drivers::GPIOInstances ::GPIO_3),
CELLULAR_GPIO_1_CTS_PIN = 14,
CELLULAR_GPIO_1_RTS_PIN = 15,
CELLULAR_GPIO_3_DTR_PIN = 27,
CELLULAR_GPIO_2_POWER_PIN = 18,
CELLULAR_GPIO_2_RESET_PIN = 17,
CELLULAR_GPIO_2_RI_PIN = 21,
CELLULAR_GPIO_2_APRDY_PIN = 16,
CELLULAR_GPIO_2_WAKEUP_PIN = 22, // GPIO_B1_06, long time no see. Active low, external pull-down 10kΩ. docs: 6. Do
// not pull up WAKEUP_IN, […], pins unless the module starts up sucessfully.
CELLULAR_GPIO_2_WIRELESS_DISABLE_PIN = 23, // GPIO_B1_07, pull-up in modem, active low, equiv. AT+CFUN=4, see docs
CELLULAR_GPIO_2_SIM_TRAY_INSERTED_PIN = 11,
CELLULAR_GPIO_2_NC = 10, // GPIO_B0_10
CELLULAR_GPIO_2_SIMCARD_PRESENCE_PIN = 9,
CELLULAR_GPIO_2_SIMSEL_PIN = 20, // GPIO_B1_04
CELLULAR_GPIO_2_ANTSEL_PIN = 2,
CELLULAR_GPIO_1_STATUS_PIN = 2, // GPIO_AD_B0_02
CELLULAR_GPIO_2_USB_BOOT_PIN = 24, // GPIO_B1_08, output
CELLULAR_LPUART_INSTANCE = static_cast<int>(drivers::LPUARTInstances::LPUART_1),
EINK_DMA = static_cast<int>(drivers::DMAInstances ::DMA_0),
EINK_DMAMUX = static_cast<int>(drivers::DMAMuxInstances ::DMAMUX0),
EINK_TX_DMA_CHANNEL = 0,
EINK_RX_DMA_CHANNEL = 1,
EINK_GPIO = static_cast<int>(drivers::GPIOInstances ::GPIO_3),
EINK_CS_PIN = 13,
EINK_RESET_PIN = 16,
EINK_BUSY_PIN = 17,
EINK_PLL = static_cast<int>(drivers::PLLInstances::PLL2_PFD2),
EINK_LPSPI_INSTANCE = static_cast<int>(drivers::LPSPIInstances::LPSPI_1),
EINK_BELL_PWR_GPIO = static_cast<int>(drivers::GPIOInstances ::GPIO_1),
EINK_BELL_PWR_PIN = 19,
BLUETOOTH_DMA = static_cast<int>(drivers::DMAInstances ::DMA_0),
BLUETOOTH_DMAMUX = static_cast<int>(drivers::DMAMuxInstances ::DMAMUX0),
BLUETOOTH_TX_DMA_CHANNEL = 8,
BLUETOOTH_RX_DMA_CHANNEL = 9,
EMMC_PLL = static_cast<int>(drivers::PLLInstances::PLL2_PFD2),
EMMC_USDHC_INSTANCE = static_cast<int>(drivers::USDHCInstances::USDHC_2),
AUDIO_PLL = static_cast<int>(drivers::PLLInstances::PLL4_Audio),
VIBRATOR_GPIO = static_cast<int>(drivers::GPIOInstances::GPIO_1),
VIBRATOR_EN = 0, // GPIO_AD_B0_00
MAGNETOMETER_I2C = AUDIOCODEC_I2C,
MAGNETOMETER_I2C_BAUDRATE = AUDIOCODEC_I2C_BAUDRATE,
MAGNETOMETER_GPIO = static_cast<int>(drivers::GPIOInstances::GPIO_1),
MAGNETOMETER_IRQ = 20, // GPIO_AD_B1_04
TORCH_DRIVER_I2C_BAUDRATE = AUDIOCODEC_I2C_BAUDRATE, // can do 400 kHz
TORCH_DRIVER_I2C = AUDIOCODEC_I2C,
TORCH_DRIVER_GPIO = static_cast<int>(drivers::GPIOInstances::GPIO_1),
TORCH_DRIVER_EN = 21, // GPIO_AD_B1_05 Active HIGH. Internal pulldown resistor of 300kΩ between HWEN and GND.
KEYPAD_BACKLIGHT_DRIVER_I2C_BAUDRATE = AUDIOCODEC_I2C_BAUDRATE,
KEYPAD_BACKLIGHT_DRIVER_I2C = AUDIOCODEC_I2C,
KEYPAD_BACKLIGHT_DRIVER_GPIO = static_cast<int>(drivers::GPIOInstances::GPIO_1),
KEYPAD_BACKLIGHT_DRIVER_NRST =
3, // GPIO_AD_B0_03 Active LOW. External pulldown resistor of 10kΩ between NRST and GND.
EINK_FRONTLIGHT_PWM_INSTANCE = 2, // GPIO_AD_B0_01 = FLEXPWM2_PWM3_B
EINK_FRONTLIGHT_PWM_MODULE = 3,
EINK_FRONTLIGHT_PWM_CHANNEL = 1, // B
LIGHT_SENSOR_I2C = AUDIOCODEC_I2C,
LIGHT_SENSOR_I2C_BAUDRATE = AUDIOCODEC_I2C_BAUDRATE,
LIGHT_SENSOR_IRQ_GPIO = static_cast<int>(drivers::GPIOInstances::GPIO_2),
LIGHT_SENSOR_IRQ = 15, // GPIO_B0_15
DCDC_INVERTER_MODE_GPIO = static_cast<int>(drivers::GPIOInstances ::GPIO_2),
DCDC_INVERTER_MODE_PIN = 26,
EEPROM_I2C = AUDIOCODEC_I2C,
EEPROM_I2C_BAUDRATE = I2C_STD_BAUDRATE,
};
#endif // PUREPHONE_BOARDDEFINITIONS_HPP