#include "board.h"
extern "C"
{
#include "fsl_common.h"
#include "fsl_clock.h"
#include "fsl_dcdc.h"
#include "fsl_snvs_hp.h"
#include "fsl_snvs_lp.h"
#include "board/pin_mux.h"
#if LOG_LUART_ENABLED
#include "fsl_lpuart.h"
#endif
}
#include "audio.hpp"
#include "chip.hpp"
#include "board/irq_gpio.hpp"
#include "reboot_codes.hpp"
#include <board/debug_console.hpp>
#include <cstdint>
extern std::uint32_t __sdram_cached_start[];
namespace bsp
{
/* MPU configuration. */
static void BOARD_ConfigMPU(void)
{
/* Disable I cache and D cache */
if (SCB_CCR_IC_Msk == (SCB_CCR_IC_Msk & SCB->CCR)) {
SCB_DisableICache();
}
if (SCB_CCR_DC_Msk == (SCB_CCR_DC_Msk & SCB->CCR)) {
SCB_DisableDCache();
}
/* Disable MPU */
ARM_MPU_Disable();
/* MPU configure:
* Use ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size)
* API in core_cm7.h.
* param DisableExec Instruction access (XN) disable bit,0=instruction fetches enabled, 1=instruction fetches disabled.
* param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode.
* Use MACROS defined in core_cm7.h: ARM_MPU_AP_NONE/ARM_MPU_AP_PRIV/ARM_MPU_AP_URO/ARM_MPU_AP_FULL/ARM_MPU_AP_PRO/ARM_MPU_AP_RO
* Combine TypeExtField/IsShareable/IsCacheable/IsBufferable to configure MPU memory access attributes.
* TypeExtField IsShareable IsCacheable IsBufferable Memory Attribtue Shareability Cache
* 0 x 0 0 Strongly Ordered shareable
* 0 x 0 1 Device shareable
* 0 0 1 0 Normal not shareable Outer and inner write through no write allocate
* 0 0 1 1 Normal not shareable Outer and inner write back no write allocate
* 0 1 1 0 Normal shareable Outer and inner write through no write allocate
* 0 1 1 1 Normal shareable Outer and inner write back no write allocate
* 1 0 0 0 Normal not shareable outer and inner noncache
* 1 1 0 0 Normal shareable outer and inner noncache
* 1 0 1 1 Normal not shareable outer and inner write back write/read acllocate
* 1 1 1 1 Normal shareable outer and inner write back write/read acllocate
* 2 x 0 0 Device not shareable
* Above are normal use settings, if your want to see more details or want to config different inner/outter cache policy.
* please refer to Table 4-55 /4-56 in arm cortex-M7 generic user guide <dui0646b_cortex_m7_dgug.pdf>
* param SubRegionDisable Sub-region disable field. 0=sub-region is enabled, 1=sub-region is disabled.
* param Size Region size of the region to be configured. use ARM_MPU_REGION_SIZE_xxx MACRO in core_cm7.h.
*/
/* Region 0 setting: Memory with Device type, not shareable, non-cacheable. */
MPU->RBAR = ARM_MPU_RBAR(0, 0xC0000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_512MB);
/* Region 1 setting: Memory with Device type, not shareable, non-cacheable. */
MPU->RBAR = ARM_MPU_RBAR(1, 0x80000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_1GB);
/* Region 2 setting */
#if defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)
/* Setting Memory with Normal type, not shareable, outer/inner write back. */
MPU->RBAR = ARM_MPU_RBAR(2, 0x60000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_512MB);
#else
/* Setting Memory with Device type, not shareable, non-cacheable. */
// TODO: MPU->RBAR = ARM_MPU_RBAR(2, 0x60000000U);
// TODO: MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_512MB);
#endif
/* Region 3 setting: Memory with Device type, not shareable, non-cacheable. */
MPU->RBAR = ARM_MPU_RBAR(3, 0x00000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_1GB);
/* Region 4 setting: Memory with Normal type, not shareable, outer/inner write back */
MPU->RBAR = ARM_MPU_RBAR(4, 0x00000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_128KB);
// CPU doesn't use cache when accessing TCM memories
/* Region 5 setting: Memory with Normal type, not shareable, outer/inner write back */
MPU->RBAR = ARM_MPU_RBAR(5, 0x20000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_512KB);
// OCRAM configured as non-cached segment
/* Region 6 setting: Memory with Normal type, not shareable, outer/inner write back */
MPU->RBAR = ARM_MPU_RBAR(6, 0x20200000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 1, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_64KB);
/* Region 7 setting: Memory with Normal type, not shareable, outer/inner write back
* BOARD_SDRAM_TEXT
*/
MPU->RBAR = ARM_MPU_RBAR(7, 0x80000000U);
#if defined(HW_SDRAM_64_MB) && (HW_SDRAM_64_MB == 1)
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_RO, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_64MB);
#else
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_RO, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_16MB);
#endif
/* The define sets the cacheable memory to shareable,
* this suggestion is referred from chapter 2.2.1 Memory regions,
* types and attributes in Cortex-M7 Devices, Generic User Guide */
#if defined(SDRAM_IS_SHAREABLE)
/* Region 7 setting: Memory with Normal type, not shareable, outer/inner write back */
MPU->RBAR = ARM_MPU_RBAR(8, 0x80000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 1, 1, 1, 0, ARM_MPU_REGION_SIZE_32MB);
#else
/* Region 9 setting: Memory with Normal type, not shareable, outer/inner write back
* BOARD_SDRAM_HEAP
*/
MPU->RBAR = ARM_MPU_RBAR(9, reinterpret_cast<std::uintptr_t>(__sdram_cached_start));
#if defined(HW_SDRAM_64_MB) && (HW_SDRAM_64_MB == 1)
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_64MB);
#else
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_16MB);
#endif // HW_SDRAM_64_MB
#endif // SDRAM_IS_SHAREABLE
/* Enable MPU */
ARM_MPU_Enable(MPU_CTRL_PRIVDEFENA_Msk);
SCB->SHCSR &= ~(SCB_SHCSR_MEMFAULTENA_Msk | SCB_SHCSR_USGFAULTENA_Msk | SCB_SHCSR_BUSFAULTENA_Msk);
/* Enable I cache and D cache */
SCB_EnableDCache();
SCB_EnableICache();
}
void BoardInit()
{
PINMUX_InitBootPins();
BOARD_InitBootClocks();
BOARD_ConfigMPU();
board::initDebugConsole();
irq_gpio_Init();
// SNVS init. is required for proper operation of the RTC when Secure Boot is used
SNVS_LP_Init(SNVS);
SNVS_HP_Init(SNVS);
SNVS_HP_ChangeSSMState(SNVS);
// Default flag set on start in non-volatile memory to detect boot fault
SNVS->LPGPR[0] = rebootCode::rebootFailedToBoot;
// Set internal DCDC to DCM mode. Switching between DCM and CCM mode will be done automatically.
DCDC_BootIntoDCM(DCDC);
PrintSystemClocks();
clearAndPrintBootReason();
}
} // namespace bsp